____________________________________________________________________________________________ DS3205
1. Typical ATCA Application
Figure 1-1 shows an ATCA blade application for the DS3205. In this application the DS3205 is used as a buffer for
the Intelligent Platform Management Bus (IPMB). The IPMB is used in ATCA for communications between and
management of all Field Replaceable Units (FRUs). The DS3205 is compliant with the ATCA IPMB requirements
as specified in PICMG 3.0 AdvancedTCA Base Requirements.
Figure 1-1. Typical Application (ATCA Blade)
Backplane
Connector
3.3V
5V
10k
BACKPLANE_SCL
Blade connector with multiple pin lengths provides "Staged" contact.
Power and ground connect first, then SCL/SDA, then ENABLE last.
DS3205
SCLIN
VCC
SCLOUT
0.01µF
10k
BOARD_SCL
10k
BACKPLANE_SDA
SDAIN
SDAOUT
10k
BOARD_SDA
ENABLE
GND
100k
READY
FAULT
Rev: 111607
5 of 20