Package Drawings & Markings
Note(s) and/or Footnote(s):
1. Dimensioning & toleranceing confirm to ASME Y14.5M-1994.
2. All dimensions are in millimeters. angles are in degrees.
3. Dimension b applies to metallized terminal and is measured between 0.25mm and 0.30mm from terminal tip.
4. Dimension L1 represents terminal full back from package edge up to 0.1mm is acceptable.
5. Coplanarity applies to the exposed heat slug as well as the terminal.
Figure 55:
Marking YYWWXZZ
YY
Pb-free; Year
WW
Manufacturing week
X
Plant Identifier
ZZ
Traceability code
@
Sublot Identifier
ams Datasheet, Confidential: 2013-Oct [3-02]
AS3909/AS3910 – 71