AD9886
Voltage Reference
Bypass with a 0.1 µF capacitor. Place as close to the AD9886
pin as possible. Make the ground connection as short as possible.
REFOUT is easily connected to REFIN with a short trace. Avoid
making this trace any longer than it needs to be.
When using an external reference. The REFOUT output, while
unused, still needs to be bypassed with a 0.1 µF capacitor in
order to avoid ringing.
OUTLINE DIMENSIONS
Dimensions shown in inches and (mm).
160-Lead MQFP
(S-160)
1.238 (31.45)
1.228 (31.20) SQ
1.219 (30.95)
0.160 (4.07)
MAX
0.041 (1.03)
1.106 (28.10)
1.102 (28.00) SQ
1.098 (27.90)
0.035 (0.88)
120
81
121
0.029 (0.73)
80
TOP VIEW
(PINS DOWN)
0.998
(25.35)
BSC SQ
SEATING
PLANE
PIN 1
0.004 (0.10)
160
41
MAX
1
40
0.010 (0.25)
MIN
0.145 (3.67)
0.135 (3.42)
0.026 (0.65)
BSC*
LEAD PITCH
0.015 (0.38)
0.012 (0.30) LEAD WIDTH
0.009 (0.22)
0.125 (3.17)
* THE ACTUAL POSITION OF EACH LEAD IS WITHIN 0.0047 (0.12) FROM ITS
IDEAL POSITION WHEN MEASURED IN THE LATERAL DIRECTION.
CENTER FIGURES ARE TYPICAL UNLESS OTHERWISE NOTED.
–32–
REV. 0