19-237 Просмотр технического описания (PDF) - EVERLIGHT

Номер в каталоге

Компоненты Описание

производитель

19-237

Full Color Chip LED

EVERLIGHT 

EVERLIGHT ELECTRONICS CO.,LTD.

19-237/R6GHBHC-A04/2T

4.Soldering Iron

Each terminal is to go to the tip of soldering iron temperature less than 280℃ for 3 seconds

within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do

soldering of each terminal. Be careful because the damage of the product is often started at the time of

the hand solder.

5.Repairing

Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a

double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether

the characteristics of the LEDs will or will not be damaged by repairing.

EVERLIGHT ELECTRONICS CO., LTD.

Office: No 25, Lane 76, Sec 3, Chung Yang Rd,

Tucheng, Taipei 236, Taiwan, R.O.C

Tel: 886-2-2267-2000, 2267-9936

Fax: 886-2267-6244, 2267-6189, 2267-6306

http://www.everlight.com

Everlight Electronics Co., Ltd.

Device No. : DSE-937-004

http://www.everlight.com

Prepared date: 04-01-2004

Rev. 1.0

Page: 12 of 12

Prepared by : Jeff Tsai

Share Link: