Philips Semiconductors
TEA1532
GreenChip™II SMPS control IC
7.17 Driver
The driver circuit to the Gate of the power MOSFET has a current sourcing capability of
typically 170 mA and a current sink capability of typically 700 mA. This permits fast
turn-on and turn-off of the power MOSFET for efficient operation.
A low driver source current has been chosen to limit the ∆V/∆t at switch-on. This reduces
Electro Magnetic Interference (EMI) and also limits the current spikes across Rsense.
8. Limiting values
Table 3: Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134). All voltages are measured
with respect to ground (pin 2); positive currents flow into the chip; pin VCC may not be current driven.
The voltage ratings are valid provided other ratings are not violated; current ratings are valid
provided the maximum power rating is not violated.
Symbol Parameter
Conditions
Min
Max Unit
Voltages
VCC
VPROTECT
VCTRL
VDEM
VSENSE
VDRAIN
Currents
supply voltage
voltage on pin PROTECT
voltage on pin CTRL
voltage on pin DEM
voltage on pin SENSE
voltage on pin DRAIN
continuous
continuous
current limited
current limited
−0.4
+20
V
−0.4
+5
V
−0.4
+5
V
-
-
V
−0.4
-
V
−0.4
+650 V
ICTRL
IDEM
ISENSE
IDRIVER
IDRAIN
General
current on pin CTRL
current on pin DEM
current on pin SENSE
current on pin DRIVER
current on pin DRAIN
d < 10 %
d < 10 %
-
50
mA
−1000 +250 µA
−1
+10
mA
−0.8
+2
A
-
5
mA
Ptot
total power dissipation
Tamb < 70 °C
SO8 package
-
0.5
W
DIP8 package
-
0.75 W
Tstg
Tj
ESD
storage temperature
junction temperature
−55
+150 °C
−20
+145 °C
VESD
electrostatic discharge
voltage
class 1
human body model
pins 1 to 7
[1] -
2000 V
pin 8 (DRAIN) [1] -
1500 V
machine model
[2] -
200
V
[1] Equivalent to discharging a 100 pF capacitor through a 1.5 kΩ series resistor.
[2] Equivalent to discharging a 200 pF capacitor through a 0.75 µH coil and a 10 Ω resistor.
9397 750 13113
Preliminary data sheet
Rev. 01 — 28 May 2004
© Koninklijke Philips Electronics N.V. 2004. All rights reserved.
12 of 27