Figure 2 : Typical Scsi Bus Configuraion
ST21S07A
NOTES:
1) C1 = 4.7µF tantalium C2 = 2.2µF tantalium or 4.7mF aluminum
2) If the ST21S07A is to be embedded into a peripheral that will act as a target on a SCSI bus, it is that recommended TERMPWR be derived
from the SCSI cable, not generated locally. In this configuration, if a power failure occurs in the peripheral, it will not affect the bus.
3) A high frequency bypass capacitor (0.1µF recommended) can be added in parallel to C1 for applications using fast rise/fall time drivers.
5/10