ORCA Series 4 FPGAs
Package Parasitics (continued)
Preliminary Data Sheet
December 2000
PAD N
LSW
RW
LSL
LMW C M
C1
LML
PAD N + 1
LSW
RW
LSL
C1
CIRCUIT
BOARD PAD
C2
C2
Figure 47. Package Parasitics
5-3862(C)r2
Package Outline Diagrams
Terms and Definitions
Basic Size (BSC): The basic size of a dimension is the size from which the limits for that dimension are derived by
the application of the allowance and the tolerance.
Design Size: The design size of a dimension is the actual size of the design, including an allowance for fit and toler-
ance.
Typical (TYP): When specified after a dimension, this indicates the repeated design size if a tolerance is specified
or repeated basic size if a tolerance is not specified.
Reference (REF): The reference dimension is an untoleranced dimension used for informational purposes only. It is
a repeated dimension or one that can be derived from other values in the drawing.
Minimum (MIN) or Maximum (MAX): Indicates the minimum or maximum allowable size of a dimension.
120
Lucent Technologies Inc.