DatasheetQ Logo
Electronic component search and free download site. Transistors,MosFET ,Diode,Integrated circuits

MAX4079CUG Просмотр технического описания (PDF) - Maxim Integrated

Номер в каталоге
Компоненты Описание
производитель
MAX4079CUG
MaximIC
Maxim Integrated MaximIC
MAX4079CUG Datasheet PDF : 15 Pages
1 2 3 4 5 6 7 8 9 10 Next Last
Complete Audio/Video
Backend Solution
+5V
AOUTL+
LINP
LEFT AUDIO
CHANNEL
AOUTL-
LINN
AUDIO
DAC
AOUTR+
AOUTR-
RINP
RINN
RIGHT AUDIO
CHANNEL
MAX4079
AOUTL+
AOUTL-
R1
C1
R2
LINP
LINN
C2
R1
R2
C2
MAX4079
Figure 1. Differential Audio Inputs
Figure 2. Filtering Differential Audio Inputs
All video inputs are stable with up to 150Ω source resis-
tance. For higher values, consult Maxim applications.
Video Reconstruction Filter
The MAX4079 reconstruction filters are 4th-order
Butterworth filters that provide a cutoff frequency of
6MHz and flat group delay response up to 4.5MHz. The
stopband offers 26dB of attenuation at 13.5MHz and
50dB at 27MHz.
Audio
The audio section of the MAX4079 is a stereo amplifier
with one differential input and two single-ended outputs
for each channel (left and right). A mono output is pro-
vided by summing the two channels of the stereo signal
together. The stereo channels have a +6dB typical
gain, while the mono has a +3dB gain.
The audio inputs can be DC-coupled, eliminating space-
consuming coupling capacitors. Each of the five outputs
can deliver 2.6VRMS into an AC-coupled 10kΩ load.
Applications Information
Audio DAC Interfacing
Differential Audio DAC
The MAX4079 accepts differential audio signals. Figure
1 shows a typical configuration for connecting the
device to an audio DAC with differential outputs. Figure
2 shows the reconstruction filters that can be used for
the differential audio inputs. Carefully select resistors
and capacitors to attenuate out-of-band noise and mini-
mize the effect on the gain. The common-mode voltage
for these signals is typically 2.5V.
Single-Ended Audio DAC
The MAX4079 can also be configured for single-ended
inputs. Figure 3 shows how to connect an audio DAC with
single-ended outputs to the MAX4079. Figure 4 shows
how reconstruction filters can be used for single-ended
audio inputs. Choose these values to minimize the
effect on gain.
If the single-ended audio DAC does not include a com-
mon-mode voltage output, create a bias point with well-
matched resistors and couple the audio signal to the
positive differential input (see Figure 5). The bias point
can also be created using a resistor-divider network
from the video supply voltage. Note that the tolerance of
the resistors will affect the common-mode and power-
supply rejection ratios. Tighter tolerances improve the per-
formance of CMRR and PSRR, e.g., 1% resistors will not
give any better than 40dB of CMRR and PSRR, whereas
0.1% resistors could improve the number to 60dB.
Power Supplies and Bypassing
The MAX4079 features single +5V (video) and +12V
(audio) supply operation, and requires no negative
supply. Connect the VVID pins together and bypass to
GVID with 0.01µF, 0.1µF, and 4.7µF capacitors in paral-
lel. Bypass the AUDV to GAUD with 0.1µF, 1µF, and
47µF capacitors in parallel. Bypass CBYPASS to GAUD
with a 1µF capacitor (see the Typical Operating Circuit).
_______________________________________________________________________________________ 9

Share Link: 

datasheetq.com  [ Privacy Policy ]Request Datasheet ] [ Contact Us ]