HDMP-1014 Просмотр технического описания (PDF) - HP => Agilent Technologies

Номер в каталоге

Компоненты Описание

производитель

HDMP-1014

Low Cost Gigabit Rate Transmit/Receive Chip Set

HP => Agilent Technologies 

LOOPEN = 0/1 selects either the

normal data or the loop channels

the I/O.

MDFSEL = 0/1 selects the Tx

single or double frame modes.

ECHKSEL = 0/1 selects either to

lock onto a frame-rate clock at

STRBIN or to use this clock as the

high speed clock and bypass the

PLL in the Tx. This input is used

mainly for testing, and should be

normally set low.

HCLKON = 0/1 turns on the high

speed serial clock outputs of the

Tx. This option was added to

conserve power.

EQEN = 0/1 disables or enables

the data equalizer in the Rx for

cable applications.

TCLKSEL = 0/1 selects the clock

source from either be derived

from the serial data stream or

from the TCLK inputs for the Rx.

This input is for testing only, and

should normally be set low.

614

Share Link: