DatasheetQ Logo
Electronic component search and free download site. Transistors,MosFET ,Diode,Integrated circuits

A050FW02V0 Просмотр технического описания (PDF) - Unspecified

Номер в каталоге
Компоненты Описание
производитель
A050FW02V0
ETC
Unspecified ETC
A050FW02V0 Datasheet PDF : 28 Pages
First Prev 21 22 23 24 25 26 27 28
Version:
Page:
0.0
26/28
H. Precautions
1. Do not twist or bend the module and prevent the unsuitable external force for display module during
assembly.
2. Adopt measures for good heat radiation. Be sure to use the module with in the specified temperature.
3. Avoid dust or oil mist during assembly.
4. Follow the correct power sequence while operating. Do not apply the invalid signal, otherwise, it will
cause improper shut down and damage the module.
5. Less EMI: it will be more safety and less noise.
6. Please operate module in suitable temperature. The response time & brightness will drift by different
temperature.
7. Avoid to display the fixed pattern (exclude the white pattern) in a long period, otherwise, it will cause
image sticking.
8. Be sure to turn off the power when connecting or disconnecting the circuit.
9. Polarizer scratches easily, please handle it carefully.
10. Display surface never likes dirt or stains.
11. A dewdrop may lead to destruction. Please wipe off any moisture before using module.
12. Sudden temperature changes cause condensation, and it will cause polarizer damaged.
13. High temperature and humidity may degrade performance. Please do not expose the module to the
direct sunlight and so on.
14. Acetic acid or chlorine compounds are not friends with TFT display module.
www.DataSheet.co.kr
15. Static electricity will damage the module, please do not touch the module without any grounded
device.
16. Do not disassemble and reassemble the module by self.
17. Be careful do not touch the rear side directly.
18. No strong vibration or shock. It will cause module broken.
19. Storage the modules in suitable environment with regular packing.
20. Be careful of injury from a broken display module.
21. Please avoid the pressure adding to the surface (front or rear side) of modules, because it will cause
the display non-uniformity or other function issue.
ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS PAPER SHALL NOT BE REPRODUCED, COPIED,
OR TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION FROM AU OPTRONICS CORP.
Datasheet pdf - http://www.DataSheet4U.net/

Share Link: 

datasheetq.com  [ Privacy Policy ]Request Datasheet ] [ Contact Us ]