W83601R/602R
8.3.2 INT output
Two output modes for INT pin. One is LEVEL mode and the other is PULSE.
INT Output Mode
Polarity
Output
Wave
Level
0(normal low)
1
1(normal high)
0
Pulse
0(normal low)
High Pulse
1(normal high)
Low Pulse
Preliminary
In Level mode, if INT is activated, it will be de-activated when interrupt status registers are read.
In Pulse mode, interrupt will be activated again unless all enabled interrupt status registers are read.
8.3.3 GPI interrupt status
Once a transition occurs at GPI input pins, interrupt status registers(CR10, CR11) will be set. At
the mean time, if interrupt function is enable, INT pin will generate a interrupt. Reading these interrupt
registers will clear themselves and reset interrupt. If an interrupt occurs but no read to interrupt status
registers, interrupt will not be generated again.
- 13 -
Publication Release Date: Aug. 1999
Revision 0.32