M4A3-192 Просмотр технического описания (PDF) - Lattice Semiconductor
Номер в каталоге
Компоненты Описание
производитель
M4A3-192 Datasheet PDF : 62 Pages
| |||
I/O Cell
The I/O cell (Figures 10 and 11) simply consists of a programmable output enable, a feedback
path, and flip-flop (except ispMACH 4A devices with 1:1 macrocell-I/O cell ratio). An individual
output enable product term is provided for each I/O cell. The feedback signal drives the input
switch matrix.
Individual
Output Enable
Product Term
From Output
Switch Matrix
To
Input
Switch
Matrix
Q D/L
Individual
Output Enable
Product Term
From Output
Switch Matrix
Block CLK0
Block CLK1
Block CLK2
Block CLK3
Power-up reset
To
Input
Switch
Matrix
17466G-017
17466G-018
Figure 10. I/O Cell for ispMACH 4A Devices with 2:1 Figure 11. I/O Cell for ispMACH 4A Devices with 1:1
Macrocell-I/O Cell Ratio
Macrocell-I/O Cell Ratio
The I/O cell (Figure 10) contains a flip-flop, which provides the capability for storing the input
in a D-type register or latch. The clock can be any of the PAL block clocks. Both the direct and
registered versions of the input are sent to the input switch matrix. This allows for such functions
as “time-domain-multiplexed” data comparison, where the first data value is stored, and then the
second data value is put on the I/O pin and compared with the previous stored value.
Note that the flip-flop used in the ispMACH 4A I/O cell is independent of the flip-flops in the
macrocells. It powers up to a logic low.
Zero-Hold-Time Input Register
The ispMACH 4A devices have a zero-hold-time (ZHT) fuse which controls the time delay
associated with loading data into all I/O cell registers and latches. When programmed, the ZHT
fuse increases the data path setup delays to input storage elements, matching equivalent delays
in the clock path. When the fuse is erased, the setup time to the input storage element is
minimized. This feature facilitates doing worst-case designs for which data is loaded from
sources which have low (or zero) minimum output propagation delays from clock edges.
ispMACH 4A Family
17
Share Link: 