Overview The LC58E76 is an on-Chip EPROM microcontroller in the LC587X series of CMOS 4-bit single Chip microcontrollers. The LC58E76 provides the same functionality as the LC5876 mask ROM version, and has the same pin layout. The LC58E76 has a 16-kbyte EPROM capacity, and corresponds to the LC5872, LC5873, LC58E74 and LC5876. The LC58E76 is provided in an 80-pin ceramic window package, and programs can be written and erased repeatedly. Thus it is optimal for use during program development.
Applications The LC58E76 can be used for program and function evaluation in the following applications. • System control of consumer products that use LCD displays, such as cameras, CD players and tuners • Remote controllers for products such as VCRs or tuners • System control of instruments that use LCD displays, such as miniature test equipment and medical equipment. • The LC58E76 is optimal for products that use LCD displays, in particular, battery operated products.
The LC5863H/64H are CMOS type 4-bit singel Chip microcomputers with internal 6K/8K-byte ROM, 1K-bit RAM and LCD driver. The internal function of the LC5863H/64H microcomputers cap operate at low voltage level.
Applications: - Control and LCD display for cameras, CDs and tuners - Remote control for VCRs, tuners, and the like - Control and LCD display for small-sized measuring instruments and measuring equipment in medical field, and, - Control and LCD display for electronic appliances with LCD display function, particularly for household produce driven by dry battery
BL2456 single-Chip CMOS microcontrollers use four MCU core, to achieve maximum efficiency. BL2456 has LCD direct drive capability, eight timer / counter timer and the standard time (Watch Timer), these features make It must be applied to the various needs of LCD design functionality occasions.
BL2456 The 64-pin QFP package which can be used for up to 16-pin I / O. Four vectored interrupts so that internal and external events interrupt response Very fast. Moreover, BL2456 advanced CMOS technology provides low power consumption and a relatively large operating voltage range.
The Chip is compatible with Samsung S3C72N4 PIN TO PIN.
Overview The LV4124W is a LCD panel driver for use in low-temperature polysilicon TFT LCDs that integrates an RGB decoder, a driver, and a timing controller in a single Chip. This IC is manufactured in Bi-CMOS process and supports the ALP202 2.0-inch color LCD panel.
Features • Supports NTSC/PAL standard • Supports composite, Y/C, and Y/color difference inputs • Built-in BPF, TRAP, and DL circuits • Sharpness function • Dual point γ correction circuit • Pre-charge circuit • R and B outputs delay time correction circuit (Supports up and down and right and left inversions) • Polarity reverse circuit • External RGB input supported • Line inversion supported • Supports AC drive for the LCD panel during no signal • Serial bus for mode setting and electric VR
Functions • Analog block: RGB decoder/driver • Digital block: Timing generator
Overview The LC587004, LC587006 and LC587008 are 80-pin low voltage CMOS 4-bit microprocessors that include LCD drivers, 2 Kb RAM and 8, 12, or 16 KB ROM on Chip. These microprocessors correspond to the earlier LC5870 series with the 256 by 4-bit on-Chip RAM expanded to a 512 by 4-bit capacity.
Applications • System control and LCD display in CD players, cameras and radio tuners • System control and LCD display in miniature test equipment and consumer health care products • These microprocessors are optimal for products that include LCD displays and, in particular, battery operated products. • Remote controllers for VCRs and audio equipment
The Realtek RTL8100B(L) is a highly integrated, cost-effective single-Chip Fast Ethernet controller that provides 32-bit performance, PCI bus master capability, and full compliance with IEEE 802.3u 100Base-T specifications and IEEE 802.3x Full Duplex Flow Control. It also supports the Advanced Configuration power management Interface (ACPI), PCI power management for modern operating systems that are capable of Operating System Directed power management (OSPM) to achieve the most efficient power management possible. The RTL8100B(L) does not support CardBus mode as the RTL8139C does.