Electronic component search and free download site.
Transistors,MosFET ,Diode,Integrated circuits

P/N + Описание + Поиск контента

Ключевые слова :
Номер в каталоге(s) : AN6752
Panasonic Corporation
Компоненты Описание : AN6752 / DIP 18Pin

AN6752 Product Details

The AN6752 parts manufactured by PANASONIC are available for purchase at Jotrin Electronics website. Here you can find a wide variety of types and values ​​of electronic parts from the worlds leading manufacturers.The AN6752 components of Jotrin Electronics are carefully chosen, undergo stringent quality control and are successfully meet at all required standards.
The production status marked on Jotrin.com is for reference only.If you did not find what you were looking for, you can get more value information by email, such as the AN6752 Inventory quantity, preferential price, and manufacturer.We are always happy to hear from you so feel free to contact us.

Номер в каталоге(s) : DV41464 DV41464P-10
Компоненты Описание : DV41464P-10 / DV41464 / DIP 18Pin
Компоненты Описание : 64-Bit Inverting-Output Bipolar RAM

64-Bit Inverting-Output Bipolar RAM

Компоненты Описание : 2nd Generation DIP and Mini-DIP-IPM

• Ultra Compact Transfer Mold Package
• Including Drive and Protection ICs (low and high voltage drive ICs)
• Low and High Speed Types
• All Mitsubishi DIP and Mini-DIP-IPMs have lead-free terminals
• From January 2006 onwards, all DIP and Mini-DIP-IPMs will be supplied with completely lead-free technology

Компоненты Описание : TaNFilm® High Temperature DIP and SIP Networks

TaNFilm® High Temperature DIP and SIP Networks

The IRC 1900HT and 4700HT Series is the ultimate combination of precision performance, reliability, and long term stability in a low profile, TaNFilm® DIP and SIP packages. The rugged welded lead construction combined with the inherent passivation characteristics of tantalum nitride film insure superior continuous performance in high temperature applications over the installed life of the part.

1900HT / 4700HT SERIES
• Inherent reliability
• Custom configurations available
• Bonded leads not susceptible to solder reflow problems
• Absolute tolerence to ±0.1% - ratio accuracy to ±0.05%
• Absolute TCR to ±25 ppm/°C - ratio tracking to ±5ppm/°C

Компоненты Описание : Generation DIP and Mini-DIP-IPM

• Employing 5th generation planar IGBT chips with 0.6µm design rule or CSTBT™ technology with superior loss performance
• Ultra compact dual or single-in-line transfer mold package (compatible with 2nd generation)
• Including driver and protection circuitry (UV, SC)
DIP-IPM with reduction of thermal resistance by 20%
• 2500Vrms isolation voltage
• High-active interface logic for direct connection to a 3V or 5V MCU
• Highest reliability and optimised EMI performance
• Available from 3A to 50A / 600V for motor ratings from 0.1kW to 3.7kW
• Optional with open emitter topology for vector control
• All Mitsubishi DIP and Mini-DIP-IPMs have lead-free terminals
• From January 2006 onwards, all DIP and Mini-DIP-IPMs will be supplied with completely lead-free technology

Advanced Micro Devices
Компоненты Описание : Voltage Comparator

Voltage Comparator

■ 6.5 ns Maximum Propagation Delay at 5 mV Overdrive
■ Complementary ECL Outputs
■ 3.0 ns Latch Setup Time
■ 50 Ω Line Driving Capability


The ST62 gang programmers are designed for programming up to 10 EPROM or OTP devices. It can run either in standalone or remote mode under control of a Windows compatible PC.
In standalone mode, the target ST62 MCUs are programmed with a simple key operation directly from a master EPROM memory or from a master EPROM MCU. Two color LEDs indicate for each target device the operational pass or fail. Both VERIFY and BLANK CHECK functions are pro vided.
In Remote mode, the gang programmer is connected to a PC through an RS232 serial channel. Object code in either S19 or INTEL HEX format is read from disk files to program the target devices.
The Windows software also offers VERIFY, BLANK CHECK, READ master and other utility functions. The software allows various user friend ly facilities, such as re-instating the same pro gramming session, user selectable programming steps.
The gang programmer is made up of a two parts, a base unit common to all ST62XX devices and a dedicated package adaptator.

■ Programs simultaneously up to 10 ST62Exx EPROM and OTP MCUs
■ Standalone and PC driven modes
DIP and SO packages supported

■ Windows based software
■ S19 or INTEL hex file format

Номер в каталоге(s) : KSD05H
OTAX Corporation
Компоненты Описание : DIP Switch

DIP Switch

Номер в каталоге(s) : BSI-10
DB Lectro Inc
Компоненты Описание : DIP SWITCH


12345678910 Next

All Rights Reserved© datasheetq.com  [Privacy Policy ] [ Request Datasheet] [Contact Us]