W91570DN SERIES
• E: Store digit
• MUTE: Mute key
• F1, F2, F3: Flash keys
• SAVE: Save memory key
• MER: Mercury memory key
• OKR: One-key redial function
• RTC: Real time clock toggle key
• HOLD1, HOLD2: Hold function keys
• R/P1, R/P2: Redial and pause function keys, P1 is 3.6 sec. and P2 is 2.0 sec.
• TIM: a. Display last calling time
b. Start and/or stop counting up calling time
• HOUR and MIN: Active when setting mode is operated after off-hook
• A1, A2: Indirect repertory memory dialing function keys, A1 for page 1 and A2 for page 2
If Lp = 0 to 9, Mp = M0 to M9, and Mq = M10 to M19, then
a. A1 + Lp (or Mp) the memory location M0 to M9 will be selected
b. A2 + Lp (or Mp) the memory location M10 to M19 will be selected
c. A1 (or A2) + Mq the memory location M10 to M19 will be selected
• */T: * in tone mode and P→T in pulse mode
• CHK: a. Check dialing number
b. Check last dialing time
c. Memory check (except mercury)
• ICON12, ..., ICON16: Keys reserved for user, can be toggled on any time when the chip is enabled
Notes: D1, ..., Dn, D1', ..., Dn': 0, ..., 9, ∗/T, #
R/P: R/P1 or R/P2
An: A1, A2
Ln: 0, ..., 9, map to indirect memory location 0, ..., 9
Mn: Direct memory location M0, ..., M19
Normal Dialing
OFF HOOK (or ON HOOK & HFI ¡õ ), D1 , D2 , ..., Dn
1. D1, D2, ..., Dn will be dialed out.
2. Dialing length is unlimited, but redial is inhibited if the length oversteps 32 digits in normal dialing.
Redialing
If ARD pin = floating, the one-key redial function is selected:
1. OFF HOOK (or ON HOOK & HFI ¡õ ), D1 , D2 , Check Memory (or
Number Store ), D3 , ..., Dn
, Busy,
ON HOOK , OFF
(or
-8-