Figure 5. Maximum LED power dissipation
150
100
50
0
-60 -40 -20 0
20 40 60 80 100
Ta - Ambient Temperature - °C
Figure 6. Typical output characteristics
IT = f(VT), parameter: Tj
Figure 8. Current reduction
ITRMS=f(TPIN5), RthJ–PIN5=16.5 K/W
Thermocouple measurement must be performed
potentially separated to A1 and A2. Measuring
junction as near as possible at the case.
Figure 9. Typical trigger delay time
tgd=f (IFIFT25∞C), VD=200 V, f=40 to 60 Hz,
parameter: Tj
Figure 7. Current reduction
ITRMS=f(TA), RthJA=125 K/W
Device switch soldered in pcb or base plate.
Figure 10. Typical inhibit current
IDINH =f(IF/IFT25∞C)
VD=600 V, parameter: Tj
IL410
5–4