P/N + Описание + Поиск контента

Package OUTLINE DRAWING QSOP - 0.150" NARROW BODY Package

Surface mounted, 5 pin Package Package outline

GENERAL DESCRIPTION
The ADG465 is a single channel protector that comes in SOT-23 and MSOP Packages. The channel protector is in series with the signal path and protects sensitive components from voltage transience in the signal path whether or not the power supplies are present. Because the channel protection works regardless of the presence of the supplies, the channel protectors are ideal for use in applications where correct power sequencing cannot always be guaranteed to protect the analog inputs (for example, hot insertion rack systems). See the Applications Information section for further details.
   
FEATURES
    Fault and overvoltage protection up to ±40 V
        Signal paths open circuit with power off
        Signal path resistance of RON with power on
    Supply maximum ratings (VDD to VSS): 44 V
    Low on resistance (RON): 80 Ω typical
    ±1 nA maximum path current leakage at 25°C
    Low power dissipation: 0.8 µW typical
    Latch-up proof construction
   
APPLICATIONS
    ATE equipment
    Sensitive measurement equipment
    Hot insertion rack systems
    ADC input channel protection
   

Package outline

DIP14: plastic dual in-line Package; 14 leads (300 mil)

Package outline

SO16: plastic small outline Package; 16 leads; body width 3.9 mm

Description
The MID-13A45 is a Two Bits silicon phototransistor mounted in a special dark plastic side looking Package. The lensing effect of the Package allows a wide acceptance angle.

Features
● Wide range of collector current
● Low cost plastic Package
● High resolution for mouse application

Description
The MID-14422 is a NPN silicon phototransistor mounted in a lensed ,water clear plastic and side looking Package.

Features
• Wide range of collector current
• Lensed for high sensitivity
• Clear transparent Package
• Low cost plastic Package

Description
The MID-11422 is a NPN silicon phototransistor mounted in a lensed ,water clear plastic and side looking Package.

Features
• Wide range of collector current
• Lensed for high sensitivity
• Clear transparent Package
• Low cost plastic Package

Rugged glass Package, using a high temperature alloyed construction. This Package is hermetically sealed and fatigue free as coefficients of expansion of all used parts are matched.

FEATURE
a) Adopting new 4th generation planar IGBT chip, which performance is improved by 1µm fine rule process.
b) Using new Diode which is designed to get soft reverse recovery characteristics.
c) Keeping the Package compatibility.
    The layout/position of both terminal pin and mounting hole is same as S-series 3rd generation IPM.
• 3φ 75A, 1200V Current-sense IGBT for 15kHz switching
• Monolithic gate drive & protection logic
• Detection, protection & status indication circuits for overcurrent, short-circuit, over-temperature & under-voltage (P-Fo available from upper leg devices)
• Acoustic noise-less 11/15kW class inverter application
• UL Recognized Yellow Card No.E80276(N) File No.E80271

APPLICATION
    General purpose inverter, servo drives and other motor controls