Product Description 
3M™ Scotch-Weld™ Polyurethane Reactive Adhesives are a family of onecomponent, moisture curing, urethane Adhesives. These Adhesives are applied warm and bond a wide variety of substrates such as wood, fiber reinforced plastic (FRP) and many other plastics to themselves, to metal and to glass.

Features 
• 100% solids 
• High strength bonds
• Rapid rate of strength build-up 
• One component
• Broad substrate adhesion 
• Various set times
• Highly plasticizer resistant 
• Can be used to bond heat sensitive materials

Product Description 
3M™ Scotch-Weld™ Epoxy Adhesives DP-100 and DP-100NS are two-part Adhesives offering fast cure and machinability.
Available in larger containers like 3M™ Scotch-Weld™ Epoxy Adhesives 100 B/A or 100 NSB/A.

Features 
• Easy mixing
• High Flow (Scotch-Weld DP-100 Clear)
• Non-Sag (Scotch-Weld DP-100 NS Translucent)
• Fast Cure
• Scotch-Weld DP-100 meets UL 94 HB

Product Description
3M™ Hot Melt Adhesives are heat applied, 100% solids Adhesives. They are fast setting thermoplastic Adhesives with good “hot tack” and low to medium viscosity.
3M™ Hot Melt Adhesives bond to a wide variety of substrates such as corrugated, beadboard, repacking chipboard, recouperage, wood and many other lightweight materials.

Features
• 100% solids, no VOCs
• Easy to use
• Fast-setting adhesive obtains strength in seconds
• Low Melt (LM) Adhesives are designed for low temperature application and heat sensitive substrates
• “Quick grab” for instant adhesion that cools to a tack free solid
• Ideal for packaging and many woodworking applications.

General Construction :
A 4 pair, 24 AWG, 100 Ohm SFTP round patch cable, designed to the ISO / IEC 11801 Category 5e requirements (cat 5e on 76m). The cable contains 4 twisted pairs, cabled, double shielded with kevlar reinforcement strands, jacketed in black UV resistant Polyurethane HFFR. Designed for fixed or portable applications in harsh environments.

HFFR : Halogen Free Flame Retardant

Jacket Compound Specification :
Halogen Free Flame Retardant Polyether-based Polyurethane. Glossy finish. Excellent hydrolysis resistance.
High microbial resistance. UV resistant. High flexibility.

The SAMES SA9903B is a single phase bi-directional energy/power metering integrated circuit that performs measurement of active and Reactive power, mains voltage and mains frequency. The SA9903B is pin compatible to the SA9603B. New features include, RMS mains voltage and accurate Reactive power measurements.

Features
■ Self-healing properties
■ Low dissipation factor
■ High insulation resistance

Typical applications
   For general sine wave applications, mainly as motor run capacitor

Construction
■ Dielectric: polypropylene film
■ Plastic case
■ Polyurethane resin

Features
• Axial leaded type, small light weight design.
• Special magnetic core structure contributes to high Q and self resonant frequencies.
• Treated with epoxy resin coating for humidity resistance to ensure longer life.
• Heat resistant Adhesives and special structural design for effective open circuit measurement.

DESCRIPTION

The SAMES SA9904A is a three phase bi-directional energy/power metering integrated circuit that performs measurement of active and Reactive power, mains voltage and mains frequency.

The SA9904A is pin compatible to the SA9604A. New features include, RMS mains voltage and accurate Reactive power measurements.

Measured values for active and Reactive energy, the mains voltage and frequency for each phase are accessible through a SPI bus from 24 bit registers.

FEATURES

■ Bi-directional active and Reactive power/energy measurement

■ RMS Voltage and frequency measurement

■ Individual Phase information

■ SPI communication bus

■ Meets the IEC 521/1036 Specification requirements for Class 1 AC Watt hour meters

■ Meets the IEC 1268 Specification requirements for VAR hour meters

■ Protected against ESD

■ Total power consumption rating below 60mW

■ Uses current transformers for current sensing

■ Operates over a wide temperature range

■ Precision voltage reference on-chip

Product Description
3M™ Scotch-Weld™ Polyurethane Sealant DP-5001 is a black, fast-setting, two component Polyurethane. It is packaged as 1:1 ratio liquids in duo-pak cartridges. With the squeeze of the trigger, the components are automatically mixed through a mixing tip and easily dispensed.

Product Features
• Fast-setting to reduce downtime
• Abrasion resistant
• Remains ɦexible at low temperature
• Automatic one-step mixing and dispensing decreases waste
• Balanced, low-viscosity, liquid components form an easy-to-use paste
• Withstands a wide range of temperatures
• 100% urethane
• Odorless application

Features
■ Case and potting flame-retardant as per UL 94 V-0
■ High resonance frequency owing to special winding technique
■ Approx. 1 % stray inductance for symmetrical interference suppression

Construction
■ Current-compensated ring core double choke with ferrite core
■ Polycarbonate case
■ Polyurethane potting
■ Sector winding