FEATURES
• Miniature size,wide capacitance,tape and reel
   packaging available for auto-placement.
• Coating by epoxy resin,creales the excellent humidity
   resistance and preventsbody trom damaging during
   soldering and washing.
• Industry standard size and vanous load spacing
   avallable.

Mono-kap™ series

Leaded CERAMIC MULTILAYER CAPACITORs

MULTILAYER CERAMIC CAPACITOR

HighCV, X7R 0805 1µF 50 V

MULTILAYER CERAMIC CAPACITOR

HighCV, X7R 0603 50 V

MULTILAYER CERAMIC CAPACITOR

HighCV, X7R 1206 50 V

Description
The MLSC series was designed for applications directly linked to a power source / voltage source (e.g. battery, clamp 30 in automotive applications) and safety relevant application without (integrated) current limitation.

Features
▪ The MLSC (Multi Layer Serial CERAMIC CAPACITOR) consists of two serial connected CAPACITORs
   in one component
▪ Due to the special design the probability of a short circuit is much reduced
   - in case of a bending crack
   - in many cases of an assembling crack
   - in many cases of a solder shock crack
▪ The MLSC meets the requirements of automotive manufacturers for a (redundant) serial
   connection of two CAPACITORs, if the application is directly connected to the battery, in one
   component.
▪ Reduced number of components leads to
   - increased reliability
   - place saving on the PCB
   - reduced assembling time
▪ The MLSC is based on established MLCC technology, but with more robust design. This
   MLCC technology offers highest reliability (ppb-rate) and long term field experience.
▪ The MLSC offers high reliability due to more stringent process control and end of line testing,
   which enables the achievement of a 10 ppb level for the application failure rate (measure: 0
   mileage and field), see chapter ppb – Level Assurance System page 12.
▪ The MLSC meets AEC-Q200 requirements, see pages 7 – 11.
▪ The specified bending strength is 2 mm according to piezo electric method (∆I measurement)
▪ The MLSC is suitable for applications with temperature requirements up to 150 °C with respect
   to the voltage derating and short term temperature peaks up to 175 °C without load, see
   chapter High Temperature Application page 3.
▪ The MLSC is lead free in terms of RoHS.
▪ Nickel barrier termination
▪ BME technology
▪ The MLSC offers a selected range of capacitance in case size 0805 (rated voltage 50 V and
   100 V).

Applications
Applications directly linked to a power source / voltage source and safety relevant application without (integrated) current limitation. Some examples:
   ▪ Automotive electronics (e.g. clamp 30, RF filter in small power motors, security control
      systems or drive and engine control units)
   ▪ Power electronics (e.g. DC/DC converter)
   ▪ Mobile devices with battery / accumulator (e.g. filter at charging set)

Features
■ High volumetric efficiency
■ Non-linear capacitance change
■ High insulation resistance
■ High pulse strength

Applications
■ Blocking and coupling
■ Decoupling
■ Interference suppression

INTRODUCTION
MLCC(MULTILAYER CERAMIC CAPACITOR) is SMD(Surface Mounted Device) type CAPACITOR that is used in wide ranges of capacitance. MLCC is paid more attentions than other CAPACITORs due to the better frequency characteristics, higher reliability, higher withstanding voltage and so on. MLCC is made of many layers of CERAMIC and inner electrodes like sandwich. Pd was used for inner electrodes. But the price of Pd was skyrocketed and Pd was replaced by the BME(Base Metal Electrode), which reduced the total cost of MLCC.
This inner electrode is connected to outer termination for surface mounting, which is composed of three layers, Cu or Ag layer, Ni plating layer, and SnPb or Sn plating layer. Most of MLCCs become Pb free by the environmental issue at present.

FEATURE AND APPLICATION
● Feature
- Miniature Size
- Wide Capacitance and Voltage Range
- Tape & Reel for Surface Mount Assembly
- Low ESR

● Application
- General Electronic Circuit

MULTILAYER CERAMIC CHIP CAPACITOR - SMD

MULTILAYER CERAMIC CHIP CAPACITOR - SMD