P/N + Описание + Поиск контента

METALLIZED POLYPROPYLENE CAPACITORS

METALLIZED POLYPROPYLENE CAPACITORS

METALLIZED POLYPROPYLENE CAPACITORS

METALLIZED POLYPROPYLENE

HI-TECH CAPACITOR TECHNOLOGY MEETS THE DEMAND OF TODAYS HI-TECH SWITCH-MODE POWER SUPPLIES

EFC Series SP1213 are METALLIZED POLYPROPYLENE CAPACITORS in a wrap and fill construction.
Special metallization and high-tech terminations allow these CAPACITORS to operate at up to 30
Amps ripple current at frequencies up to 100 kHz. SP1213 exhibit little or no capacitance
rolloff, when compared to electrolytics, at these high frequencies.

SPECIFICATIONS
1. TEMPERATURE RANGE:
    -55°C to +85°C at full voltage ratings.
    To 105°C with 25% voltage derating.
2. CAPACITANCE TOLERANCES:
    + 1%, 2%, 5%, 10%, 20%.
3. DISSIPATION FACTOR (1 kHz):
    0.1% maximum when measured at 25°C.
4. INSULATION RESISTANCE:
    150,000 Megohm-Microfarads (need
    not exceed 300,000 Megohms) when
    measured at rated voltage at 25°C.
5. ESR:
    See Dimensions and Ratings Tables.

METALLIZED POLYPROPYLENE CAPACITORS

Tubular Wrap and Fill

METALLIZED POLYPROPYLENE CAPACITORS

Oval Wrap and Fill

Lead Specs.
Tinned Copperweld
Under .190T = 24 AWG
.190 - .380T = 22 AWG
Above .380T = 20 AWG

[Xiamen Faratronic Co. Ltd]

Box-type METALLIZED POLYPROPYLENE FILM Interference Suppression Capacitor

■ Features
● METALLIZED POLYPROPYLENE structure
● Withstanding overvoltage stressing
● Plastic case (UL94 V-0), Epoxy resin sealing.
● Widely used in interference suppression circuit

[ELECTRONIC FILM CAPACITORS, INC.]

POLYPROPYLENE and Foil CAPACITORS

Tubular Wrap and Fill

Typical applications

Smoothing

Snubbering

High-frequency AC loads

Climatic

Max. operating temperature: 110 °C

Climatic category (IEC 60068-1): 55/100/56

Construction

Dielectric: POLYPROPYLENE (PP)

FILM METALLIZED on one side and metal foils internally connected in series

Plastic case (UL 94 V-0)

Epoxy resin sealing (UL 94 V-0)

Features

Very high pulse strength

Highest possible contact reliability

Self-healing properties

Terminals

Parallel wire leads, lead-free tinned

Special lead lengths available on request

FILM CAPACITORS – Power electronic CAPACITORS

Preliminary data
■ METALLIZED POLYPROPYLENE FILM CAPACITORS - aluminum case for general purpose applications
■ M12 stud on bottom of the aluminum case, nut and washer for fixing are standard for all types.
■ Others available distance between terminals: 35 and 50 mm.