DESCRIPTION
The CXA1691M is a one-chip FM/AM radio IC designed for radio-cassette tape recorders and headphone tape recorders.
FEATURE
Small number of peripheral components
Low current consumption (Vcc=3V)
FM: I D=5.3mA (Typ.)
AM: I D=3.4mA(Typ.)
Built-in FM/AM select switch
Large output of AF amplifier
FUNCTIONS
FM section
RF amplifier; Mixer and OSC (in corporating AFC variable capacitor);
IF amplifier,
Quadrature detection;
Tuning LED driver.
AM section
RF amplifier, Mixer and OSC (with RF AGC);
IF amplifier (with IF AGC)
Detector
Tuning LED driver
AF section
Electronic volume control
FM muting
GENERAL DESCRIPTION
The TEA5591 is an integrated radio circuit which is designed for use in portable receivers and clock radios. The IC is also applicable to mains-fed AM an AM/FM receivers and car radio-receivers. The main advantage of this IC is its ability to operate over a wide range of supply voltages without loss of performance. The AM circuit incorporates a balanced mixer and a ‘one-pin’ oscillator, which operates in the 0.6 MHz to 30 MHz frequency range, with amplitude control. The circuit also includes an IF amplifier, a detector and an AGC circuit which controls the IF amplifier and the mixer. The FM circuit incorporates an RF amplifier, a balanced mixer and a ‘one-pin’ oscillator together with two AC coupled IF amplifiers (with distributed selectivity), a quadrature demodulator for the ceramic filter and internal AFC.
Features
• DC AM/FM switch facility
• Three internal separate stabilizers to enable operation over
a wide range of supply voltages (1.8 to 15 V)
• All pins (except pin 9) are ESD protected.
GENERAL DESCRIPTION
The TEA5591A is a 24-pin integrated radio circuit, derived from the TEA5591 and is designed for use in AM/FM portable radios and clock radios. The TEA5591A differs from the TEA5591 in that it has:
• Separate IF input pins for AM and FM
• A split-up AM-IF stage (for distributed selectivity)
• An LED driver indicator
The main advantage of the TEA5591A is its ability to operate over a wide range of supply voltages (1.8 to 15 V) without any loss of performance.
The AM circuit incorporates:
• A double balance mixer
• A ‘one-pin’ oscillator with amplitude control operating in the 0.6 to 30 MHz frequency range
• A split-up IF amplifier
• A detector
• An AGC circuit which controls the IF amplifier and mixer.
The FM circuit incorporates:
• An RF input amplifier
• A double balanced mixer
• A ‘one-pin’ oscillator
• Two IF amplifiers (for distributed selectivity)
• A quadrature demodulator for a ceramic filter
• Internal AFC
Features
• LED AM/FM indicator
• A DC AM/FM switch facility
• Three separate stabilizers to enable operation over a wide range of supply voltages (1.8 to 15 V)
• All pins (except pin 10) are ESD protected
• Wide supply voltage range: 2.0 to 12 V
• Low current consumption: 7.5 mA at AM, 9.0 mA at FM
• High selectivity with distributed IF gain
• LED driver for tuning indication
• High input sensitivity: 1.6 mV/m (AM), 2.0µV (FM) for 26 dB S/N
• Good strong signal behaviour: 10 V/m at AM, 500 mV at FM
• Low output distortion: 0.8% at AM, 0.3% at FM
• Designed for simple and reliable PC-board layout
• High impedance MOSFET input on AM
GENERAL DESCRIPTION
The TEA5594 is a 32-pin integrated radio circuit designed for use in all Electronic Tuned radio (ETR) sets especially those sets which have to fulfil the immunity requirements of CENELEC.
The AM circuit incorporates:
• A double balanced mixer
• A ‘one-pin’ oscillator with amplitude control operating in the LW/MW frequency range
• An IF amplifier and AM detector
• An AGC circuit which controls the IF amplifier and mixer
The FM circuit incorporates:
• A front-end (fulfilling the “out of band” CENELEC requirements)
• Two IF amplifiers (for distributed selectivity)
• A quadrature demodulator with a ceramic filter
The TEA5594 also contains:
• Oscillator output buffers for AM and FM
• A combined AM/FM IF counter output buffer with counter “enable” function
• A field strength level detector for AM and FM
• A soft mute circuit at FM, adjustable
• An extra IF amplifier to split up IF filtering
Features
• Low distortion on FM
• AM/FM level/indicator circuit
• A DC AM/FM switch facility
• Supply voltages 2.7 to 15 V
• A local distance switch facility (LOCAL-DX) at FM
• All pins are ESD protected
DESCRIPTION
The TEA5711 is a high performance Bimos IC for use in AM/FM stereo radios. All necessary functions are integrated: from AM and FM front-end to AM detector and FM stereo output stages.
FEATURES
• Wide supply voltage range: 1.8 or 2.1 to 12 V
• Low current consumption: 15 mA at AM, 16 mA at FM
• High selectivity with distributed IF gain
• LED driver for stereo indication
• High input sensitivity: 1.6 mV/m (AM), 2.0 µV (FM) for 26 dB S/N
• Good strong signal behaviour: 10 V/m at AM, 500 mV at FM
• Low output distortion: 0.8% at AM, 0.3% at FM
• Signal level output
• Soft mute
• Signal dependent stereo
• Designed for simple and reliable printed-circuit board layout
• High impedance MOSFET input on AM.
APPLICATIONS
• Portable AM/FM stereo radio
• Mini/midi receiver sets
• Personal headphone radio.
[Huajing Bipolar circuit]
Overview and Features
CD1691CB is a single-chip FM/AM radio integrated circuit with high integration and few peripheral components. Its characteristics are as follows :
● Low quiescent current FM ICCQ= 5.3 mA AM ICCQ=3.4 mA typical value at VCC = 3V
● With FM/AM selector switch
● High output power PO= 450 mW typ. at VCC = 6V RL= 8
● Built-in AFC variable capacitor
● Contains RF AGC IF AGC
● Tuning LED Drivers
● Electronic volume control FM mute
● Package SOP28
INTROCUCTION
The S1A0426C02 is a monolithic integrated circuit designed for radio cassette tape recorders, clock radios and headphone radios.
FUNCTIONS
• AM/FM RF AMP
• Local OSC
• AM AGO Control
• FM AFO Control
• Audio Power AMP
• Tuning Indicator
• DC Volume
• AM/FM IF AMP
• FM Quadrature DET
• AM DET
• AUDIO MUTE
FEATURES
• Built-in AM/FM Switching circuit
• Wide operating supply voltage: VCC = 2V - 8.5V
• Low current consumption (VCC = 3V)
— FM: ICCQ = 5.3 mA (Typ)
— AM: ICCQ = 3.4 mA (Typ)
• High Power Audio Amplifier: 0.5W (typ) at VCC = 6V,
• RL = 8W, THD = 10%
INTRODUCTION
The S1A0427B01 is a monolithic integrated circuit designed for portable AM/FM radios or AM/FM clock radios.
FUNCTIONS
• AM RF & MIX
• AM AGC
• AM/FM DET
• Regulator
• AM Local OSC
• AM/FM IF AMP
• Audio Power AMP
• FM AFC Control
FEATURE
• Portable AM/FM 1-chip radio
• Wide operating supply voltage range: VCC = 3V -12V (Approximately ) (Depending on the internal regulator tolerance)
• Recommended operating suply voltage: VCC= 4.5V -9V
12345678910 Next |
|